Hudson Valley construction site near Brewster, NY — Liquid Green headquarters territory. Replace with a Brewster NY landmark image (e.g., the historic 1931 Metro-North station house on Main Street).
Headquarters

Spray Foam Insulation in Brewster, NY

Liquid Green Spray Foam HQ — Serving Putnam County, Dutchess County, Westchester, and the Lower Hudson Valley from 473 Rt 164.

Open Mon–Fri 7am–6pm Sat 9am–2pm 845-787-FOAM

Spray Foam Insulation Near Brewster, NY

If you're searching for spray foam insulation near me in the Hudson Valley, you're talking to us. Liquid Green is headquartered in Brewster — 473 Rt 164, right off I-84, a mile from the Brewster Metro-North station. Our crews leave the shop every morning and spray homes and commercial buildings across Putnam, Dutchess, and northern Westchester counties.

Being local means faster quotes, faster response, and crews who know the housing stock, the building codes, and the climate. The Hudson Valley sits in IECC climate zone 5 (with pockets of zone 4 and 6), so we size every job to meet or exceed the local R-value requirements — which have only gotten stricter with the 2020 IECC update.

Where We Spray in the Hudson Valley

Our Brewster HQ covers a roughly 60-mile radius. The towns and cities we serve regularly include:

  • Putnam County — Brewster, Carmel, Mahopac, Patterson, Southeast, Lake Carmel, Cold Spring, Garrison, Nelsonville, Putnam Valley, Philipstown
  • Dutchess County — Poughkeepsie, Wappingers Falls, Fishkill, Beacon, East Fishkill, Hyde Park, Pleasant Valley, Red Hook, Rhinebeck, Millbrook, Dover Plains, Pawling
  • Northern Westchester — White Plains, Yorktown, Somers, Katonah, Bedford, North Salem, Pound Ridge, Lewisboro, Mount Kisco, Croton-on-Hudson, Ossining
  • Lower Orange County — Monroe, Chester, Goshen, Washingtonville (on request)
  • Lower Ulster County — New Paltz, Gardiner, Marlboro, Highland (on request)

Not sure if you're in range? Drop us a line — if the drive makes sense, we'll come out.

What We Install in This Territory

Our Hudson Valley crews run the full residential and commercial spray foam catalog:

Residential — the bread and butter

  • Attic encapsulation — open cell over the floor deck, or closed cell on the underside of the roof deck. Most common Hudson Valley job. Stops ice dams, kills the stack effect, brings attics inside the conditioned envelope.
  • Rim joists — the #1 air-leakage location in most homes. Closed cell, ~3" thick. Knocks 10-15% off heating bills by itself.
  • Cathedral ceilings and bonus rooms — spray between rafters where conventional batts leave gaps and air leaks.
  • Basement walls — closed cell against poured concrete or block, with a thermal and moisture break. Code-compliant for habitable basement conversions.
  • Crawl spaces — encapsulated with closed cell on the walls, vapor barrier on the floor. Turns a vented crawl into a conditioned one.
  • Whole-home retrofits — exterior wall injection (we open the siding or drill through the sheathing) for older homes without wall insulation.

Commercial

  • Metal building and pole barn insulation (the dominant commercial ask in our territory)
  • Warehouse and agricultural structure insulation
  • New-construction residential subdivisions — we contract directly with builders
  • Commercial retrofits and tenant fit-outs

For commercial, our commercial guide covers the differences from residential work in more depth.

Why Hudson Valley Homeowners and Builders Choose Liquid Green

Local crews. Same training, same equipment, same standards on every job. Open cell and closed cell from the same chemical systems other top-tier operators use. Class 1 fire rating on every install. Quotes that show up when we say they will.

We also know the local housing stock. Pre-war colonials in Poughkeepsie. Capes and ranches from the 60s-80s throughout Putnam County. New-construction subdivisions in Yorktown and Somers. Brownstones and Victorians in Beacon. Each housing type has its own insulation challenges, and we've worked on all of them.

What Spray Foam Insulation Costs in the Hudson Valley

Per-square-foot pricing in our territory runs in line with the broader tri-state market. New-construction open cell typically prices at the lower end; retrofit closed cell in existing walls or rim joists prices higher because of the prep work. For the detailed pricing breakdown, see our cost per square foot guide.

The right way to get a real number is a quote. We come out, measure the assemblies you want sprayed, and give you a written estimate. Most quotes are scheduled within 48 hours of your call.

Looking for spray foam insulation near Brewster, Carmel, Mahopac, Poughkeepsie, Beacon, White Plains, or anywhere in the lower Hudson Valley? Call 845-787-FOAM (3626) or send us a message — we'll get you a quote within 48 hours.

Local Building Codes & Climate

Hudson Valley homes fall under the New York State Residential Code, which adopts the 2020 IECC. Climate zone 5 (with some 4 and 6 pockets) drives the following minimum R-values for spray foam:

  • Attic — R-49 to R-60 (zone 5); R-60 in zone 6
  • Wood-frame wall — R-20 to R-30 cavity + continuous, depending on zone
  • Floor over unconditioned space — R-30
  • Basement wall — R-15 continuous for habitable basements
  • Crawl space wall — R-15 continuous, plus vapor barrier on the floor

These are the floors. We typically recommend hitting slightly above the code minimum to capture the air-sealing bonus that makes spray foam worth the premium in the first place. R-value explained covers the science.

Frequently Asked Questions

Brewster, NY & the Hudson Valley

Do you do spray foam insulation near Brewster, NY?

Yes — Liquid Green is headquartered at 473 Rt 164 in Brewster, NY. We spray foam homes and commercial buildings throughout Putnam County, Dutchess County, Westchester, and the lower Hudson Valley.

What areas around Brewster do you serve?

Brewster, Carmel, Mahopac, Patterson, Southeast, Lake Carmel, Croton Falls, North Salem, Katonah, Yorktown, Poughkeepsie, Wappingers Falls, Fishkill, Beacon, White Plains, and most of Putnam, Dutchess, and northern Westchester counties.

Is open cell or closed cell better for the Hudson Valley climate?

Both work. Closed cell (R-6 to R-7 per inch) is typical for rim joists, basements, and exterior walls where you want a vapor barrier. Open cell (R-3.5 to R-3.7 per inch) is typical for attics and interior walls. Your assembly and code-required R-value drive the choice.

How fast can you get to a job in Brewster?

Because we're based in Brewster, typical response time for quotes is 24-48 hours and most jobs can be scheduled within 1-2 weeks, faster in summer, slower in peak fall season.

Do you do commercial spray foam in Putnam County?

Yes. We insulate commercial buildings, warehouses, agricultural structures, and institutional facilities across Putnam County and the surrounding region. Closed cell dominates commercial; we size to your assembly and code.

Ready to Talk?

Get a Spray Foam Quote in the Hudson Valley

We come out, measure the assemblies, and give you a written estimate. Most quotes are scheduled within 48 hours of your call.

Call 845-787-FOAM Send a Message